Solid wood beehive floor board with entrance reducer

This 10-frame candy board is coated in beeswax and designed as a winter top feeder, sitting above the brood nest rather than under the hive floor. The beeswax coating is the primary feature here, intended to provide a food source that integrates with the hive's internal environment during cold months.

In the product photo, check the thickness of the wax layer on the board's surface. If the coating looks thin or patchy, it may not provide the intended winter insulation or feeding duration, and the board's structural integrity under the weight of the upper boxes could be compromised.

These two 10-frame Langstroth screened bottom boards are dipped in 100% beeswax and include an entrance reducer screen. The screen mesh is the critical component for preventing rain from pooling under the hive while allowing for ventilation and pest control.

Look closely at the photo to see if the screen is tightly secured within the wooden frame. If the mesh appears loose or if the entrance reducer is not clearly integrated into the front edge, rainwater can bypass the drainage path and ants may find gaps to climb into the brood nest.

This 10-pack of deep brood box frames features wax-dipped plastic foundations and measures 9-1/8 inches, designed to fit standard 10-frame hives. The plastic foundation is the key material here, offering a rigid base for the bees to build comb on, which is distinct from the floor board's role in drainage.

In the listing image, verify that the wax is evenly distributed across the plastic foundation. Uneven dipping can lead to comb that is difficult to remove or that traps moisture, which indirectly affects the hive's overall humidity control and the effectiveness of any bottom board ventilation.

This Langstroth 10-frame metal screened bottom board is dipped in beeswax and comes with an entrance reducer. The metal screen is the primary feature, providing a durable barrier that allows for air circulation and pest exclusion while the beeswax coating protects the wood from moisture.

Check the photo for the condition of the metal screen. If the mesh looks bent or if the wax coating appears to be peeling off the wooden edges, the board may not seal properly against rain, allowing water to pool under the hive and creating a pathway for ants.

This 10-pack of stainless steel entrance discs has a diameter of 4.92 inches and is designed for nuc boxes. The stainless steel material is the key detail, offering a durable, non-corrosive gate that controls the size of the hive entrance.

In the product photo, inspect the edges of the discs for any sharp burrs or uneven cuts. If the edges are not smooth, they may not sit flush against the hive entrance, creating gaps that allow rain to seep in and ants to bypass the intended barrier.

These two 10-frame inner covers are designed for insulation and ventilation, sitting between the brood box and the outer cover. The wood construction is the primary feature, providing a barrier that helps regulate the hive's internal temperature and humidity.

Look at the photo to see if the inner cover has a clear, unobstructed gap around the perimeter. If the fit looks tight or if there are no visible ventilation channels, moisture from condensation can drip down onto the brood nest, mimicking the effects of rain pooling under the hive.

This 2-pack of 10-frame inner covers includes a feeding hole and is designed for insulation and ventilation. The feeding hole is the specific feature here, allowing for the placement of candy boards or other feeders directly above the brood box.

In the listing image, check the size and placement of the feeding hole. If the hole is too small or poorly positioned, it may not allow for proper airflow or feeder access, leading to increased humidity inside the hive that can cause condensation to drip onto the brood nest.

This 10-pack of unassembled deep brood box frames uses 100% beeswax-dipped plastic foundations. The unassembled nature is the key detail, meaning the frames require the beekeeper to assemble the wooden parts before use, which affects the overall structural integrity of the hive.

Check the photo for the quality of the wooden parts and the wax on the plastic foundation. If the wood looks warped or the wax is uneven, the frames may not fit tightly in the brood box, creating gaps that allow moisture and pests to enter the hive.

This 3-pack of 10-frame screened bottom boards is dipped in beeswax and includes an entrance reducer. The beeswax coating is the primary feature, intended to protect the wood from moisture and provide a barrier against pests.

In the product photo, verify that the screen is securely attached to the wooden frame. If the screen looks loose or if the wax coating is thin, the board may not effectively prevent rain from pooling under the hive or stop ants from climbing into the brood nest.