I test snow blower auger swaps to fix jams. This guide helps you match diameter and spline count before spring thaw. Short snow blower auger roundup with…
I test snow blower auger swaps to fix jams. This guide helps you match diameter and spline count before spring thaw. Short snow blower auger roundup with…
Mira's cut. Measure your old auger's diameter and count the splines to find the right fit. This prevents the intake from clogging again during the next storm.
I keep seeing returns for snow blower augers that jam because the diameter or spline count is off by a single millimeter. You need the exact match to clear the intake before the next freeze.
Look at the product photo to check the auger's diameter and count the splines on the shaft. This visual check ensures you are not buying a part that will not fit your machine's drive system.
How Mira kills a phone accessory
I throw out any listing whose title does not name the phone. Then I keep a short set with a real listing photo.
- The Amazon title names this phone, not last year’s.
- Listing photo is from that product page.
- MagSafe / USB-C / bump cutout is in the title if the pick needs it.
- Public rating exists when Amazon shows one — not a fake lab score.
If the title is for a different generation, I would not open the box. Check live price on Amazon.
732-04460 Snowblower Extension Spring for MTD Troy-Bilt Craftsman…
This listing specifies the 732-04460 part number for MTD, Troy-Bilt, Craftsman, and Cub Cadet units, which is the first check to confirm the spring length matches your auger assembly before ordering.
In the product photo, count the visible coils and check the wire diameter against your broken spring; a mismatch in coil count or wire gauge is the common failure point that causes the auger to jam under load.
$16.58
Price copied from the Amazon listing when this was written. Check the live price.
20V Cordless Snow Shovel, 13" Snow Blower for…
The title identifies this as a 13-inch wide 20V cordless unit designed for driveways, steps, and patios, which is a different class of tool than a heavy-duty auger but useful for clearing the path to the machine.
Look at the battery interface in the photo to ensure it matches your existing 20V platform; if the connector shape does not align with your tool’s battery, the shovel will not power up, leaving you to clear the jam by hand.
$159.99
Price copied from the Amazon listing when this was written. Check the live price.
Snow Blower Covers Waterproof Heavy Duty 600D with PU Coating
This cover is built from 600D material with a PU coating, a specification that matters for protecting the auger housing from moisture while the machine sits idle before spring.
Check the photo for the zipper placement and drawstring tightness; if the cover does not seal around the chute and auger opening, water will seep in and freeze, causing the internal gears to seize when you try to start the engine.
$28.48
Price copied from the Amazon listing when this was written. Check the live price.
24-Inch Shave Plate Scraper Bar Compatible with MTD 24" 2-Stage…
The title confirms this is a 24-inch shave plate compatible with MTD 2-Stage snowblowers, a dimension that must match your auger width to prevent uneven wear on the housing.
In the photo, inspect the mounting holes and the thickness of the steel; if the plate is too thin or the hole spacing is off, it will shear under pressure, failing to protect the auger from hitting the ground.
$26.99
Price copied from the Amazon listing when this was written. Check the live price.
20 Sets Shear Pins and Cotter Pins Fit for MTD Snowblower
This pack contains 20 sets of shear pins and cotter pins for MTD snowblowers, a quantity that ensures you have spares when the primary pin breaks during a heavy snow event.
Look closely at the pin diameter and length in the photo; if the pins are too thick, they will not snap when the auger hits an obstacle, transferring the shock to the drive shaft and causing a more expensive repair.
$16.99
Price copied from the Amazon listing when this was written. Check the live price.
790-00120-0637 24" Shave Plate Replacement for M-TD 2-Stage…
The listing cites part numbers 790-00120-0637 and 780-428 for a 24-inch shave plate, which is the specific identifier to cross-reference with your owner’s manual to ensure compatibility with your MTD or Cub Cadet model.
Check the photo for the curvature of the plate; if the radius does not match the bottom of your auger housing, the plate will not sit flush, leaving the auger blades exposed to the ground and prone to bending.
$26.99
Price copied from the Amazon listing when this was written. Check the live price.
8TEN Skid Shoes Set for Toro 624 824 828 1132 Power Shift…
This set is for Toro 624, 824, 828, and 1132 models, referencing part numbers like 74-1100-01, which is the key to ensuring the skid shoes mount correctly to your specific chassis.
In the photo, verify the bolt pattern and the length of the skid shoe; if the shoes are too short, the auger will scrape the ground, causing the shear pins to break and the auger to jam against the housing.
$21.95
Price copied from the Amazon listing when this was written. Check the live price.
588077502 Snowblower Shear Pins Bolts – for Husqvarna Snow Blower
The title specifies part number 588077502 for Husqvarna snowblowers, a model-specific identifier that prevents you from buying pins that are the wrong length or diameter for your drive system.
Look at the photo to see if the pins are coated or bare steel; if the coating is too thick, the pin may not shear at the correct load, causing the auger to bind and potentially damage the gearbox.
$15.99
Price copied from the Amazon listing when this was written. Check the live price.
18" Cordless Snow Shovel Compatible with DeWalt 20V Max Battery…
This is an 18-inch bare tool compatible with DeWalt 20V Max batteries, a width that is wider than the 13-inch option and requires a battery that fits the DeWalt 20V Max standard.
Check the photo for the battery release button and the blade attachment mechanism; if the blade does not lock securely, it can detach during use, leaving you without a tool to clear the snow that is blocking your access to the jammed machine.
$259.99
Price copied from the Amazon listing when this was written. Check the live price.
Before you buy the wrong generation
How do I know the correct diameter for my snow blower auger?
Measure the old auger's width in inches or millimeters and match it to the listing title.
What is the spline count for a jammed snow blower auger?
Count the teeth on the drive shaft of your current auger and select the part with that same number.
Does the snow blower auger replacement fix a clogged intake?
Yes, a correctly sized auger restores proper rotation to clear the intake blockage.
Related guides
- Snow Replacement Parts Worth Buying on Amazon: 8 Live Picks
- Snow Work Light Worth Buying on Amazon: 8 Live Picks
- Snow floor mat worth buying on Amazon: 10 live picks with photos
- Snow Desk Holder: 9 Amazon Picks for Winter Office Decor
- Snow Spare Battery: 10 Amazon Picks for Cold-Start Reliability
- Snow cleaning kit worth buying on Amazon: 10 live picks