Measure this first

I check air fryer rack dimensions against your basket width and depth. This guide helps you match the rack to your specific model before it arrives.

By Keiko Mori · Kitchen editor · Kitchen desk · Gadget Evaluator Lab

Keiko's heat check. Measure your air fryer basket's internal width and depth before selecting a rack. Match the rack dimensions to these measurements to ensure a proper fit.

As a kitchen editor, I focus on whether the rack actually fits your basket. A rack that is too wide will not close the lid, and one that is too narrow will not support your food properly.

Check the Amazon listing for the rack's exact width and depth. Compare these numbers to your air fryer basket's internal dimensions to avoid a mismatch.

1. 5 Inch Round Cooking Rack, Stainless Steel Wire Baking Rack with…

1. This listing specifies a 5-inch round diameter, which is a precise dimension you must measure against your air fryer basket or oven rack spacing.
2. Check the Amazon page to confirm the inner diameter of your cookware matches this 5-inch footprint before ordering.
3. Skip this if your appliance requires a square or rectangular grid, as the round shape will leave corners empty and may not sit flush on standard rectangular trays.
4. The stable legs are designed for specific clearance heights, so verify the vertical space in your unit matches the leg height listed.

See Deal $8.59

2. GXF Air Fryer Replacement Tray for Ninja Foodi SP201 SP301 SP351…

1. The title explicitly lists compatibility with Ninja Foodi models SP201, SP301, and SP351, along with a 13-inch by 13-inch dimension.
2. You need to match your specific model number and measure the internal tray area to ensure this 13×13 inch size fits without overhang.
3. Do not buy this if you have a different Ninja series or a non-Ninja brand, as the dimensions and attachment points are model-specific.
4. The fiberglass material is noted in the title, so if you require a different material composition for your cooking style, this specific part will not meet that requirement.

See Deal $25.59

3. Air Fryer Replacement Crisper Plate For Ninja AF100 to AF150,Grill…

1. This part is designated for Ninja AF100 through AF150 models and also lists compatibility with FD401 and OP300 to OP500 series.
2. Verify your exact model number against this list on the Amazon page to ensure the crisper plate geometry aligns with your unit's interior.
3. Skip this if your Ninja is a newer or older generation not listed in the AF100-AF150 or OP300-OP500 ranges, as the plate shape and locking mechanisms differ.
4. The title indicates a specific grill pan configuration, so if you need a flat baking sheet instead, this rack-style plate is the wrong fit.

See Deal $12.98

4. TeamFar Air Fryer Basket for Oven, 16"x12" & 12.5"x9.6" Air Fryer…

1. The listing provides two specific dimensions: 16 inches by 12 inches and 12.5 inches by 9.6 inches.
2. You must measure the interior width and depth of your oven or air fryer basket to determine which of these two sizes matches your appliance's cavity.
3. Do not select this if your appliance requires a single uniform size or if your basket dimensions fall outside these two specific rectangular measurements.
4. The title does not specify a model number, so you are relying entirely on physical width and depth measurements to confirm the fit.

See Deal $29.99

5. Air Fryer Wire Rack for Emeril Lagasse 26 QT Extra Large Air…

1. This rack is sized for the Emeril Lagasse 26 QT Extra Large Air Fryer with dimensions of 12.5 inches by 11.5 inches.
2. Check the Amazon page to confirm your unit is the 26 QT model and measure the internal basket area to match these specific stainless steel rack dimensions.
3. Skip this if you have a smaller Emeril Lagasse model or a different brand entirely, as the 12.5×11.5 inch footprint is tailored to that specific extra-large capacity.
4. The title mentions roasting and steamer functions, so if you need a part for a different cooking mode or a different rack shape, this will not align.

See Deal $11.19

6. Crisper Stainless Steel Rack Compatible for Ninja Crispi Air Fryer…

1. The title identifies this as a stainless steel rack compatible specifically with the Ninja Crispi FN101.
2. You must verify that your appliance is the FN101 model and measure the interior dimensions to ensure the rack fits the specific glass container size used by this unit.
3. Do not buy this if you have a different Ninja Crispi model or a traditional basket-style air fryer, as the FN101 uses a distinct container system.
4. The material is stainless steel, so if you require a non-metallic or coated surface for your specific food preparation, this rack does not match that requirement.

See Deal $13.99

7. Air Fryer Accessories for Ninja Foodi 13 in 1 SP351 SP301 SP201…

1. This accessory is listed for Ninja Foodi 13-in-1 models SP351, SP301, and SP201, with a specific size of 13.5 inches by 12.3 inches.
2. Measure your countertop toaster oven's internal tray space to confirm it matches this 13.5×12.3 inch replacement part dimension.
3. Skip this if your Ninja Foodi is a different series or size, as the 13.5×12.3 inch measurement is specific to the listed SP models.
4. The title indicates it is a replacement part, so if you are looking for a new primary basket rather than a specific accessory fit, this may not be the correct component for your setup.

See Deal $20.99

8. 2PCS Large Crisper Rack for Ninja Crispi FN101/AS101, Fits…

1. This listing includes two racks for the Ninja Crispi FN101 and AS101, fitting 2.5, 4, and 6 QT glass containers.
2. You must match your specific container size (2.5, 4, or 6 QT) and model number to ensure the 304 stainless steel rack fits the glass vessel dimensions.
3. Do not buy this if you have a different Ninja model or a non-glass container system, as the rack is designed to sit inside specific glass containers.
4. The title specifies food-grade 304 stainless steel, so if you require a different metal grade or a non-metallic material, this part does not meet that specification.

See Deal $16.99