10 motorcycle engine guard listings, each judged on a different detail from its own title. Short motorcycle engine guard roundup with public ratings and…
10 motorcycle engine guard listings, each judged on a different detail from its own title. Short motorcycle engine guard roundup with public ratings and…
Marcus on abuse. 10 motorcycle engine guard listings, each judged on a different detail from its own title.
This motorcycle engine guard page sticks to one shopping question.
Each pick uses a detail from its own title.
Field note 1
Motorcycle Crash Bar Engine Guard Highway Crash Bar Fit for Harley…
This guard is specified for Harley Touring models, including the Street Glide and Road King, covering the 2009-2026 range. The title highlights its role as a highway crash bar, which is critical when a heavy touring bike must be dropped on its side at a red light to prevent the fairing from cracking against the pavement.
In the product photo, check the mounting points near the engine block to ensure the steel tubing clears the exhaust headers. Look for the curvature at the bottom to see if it provides adequate ground clearance for the footpegs, as this is the part that typically fails or bends first during a low-speed drop.
$149.99
Price copied from the Amazon listing when this was written. Check the live price.
Field note 2
Motorcycle Crash Bars Engine Guard for Kawasaki Z650, 2017-2025
Designed specifically for the Kawasaki Z650 from 2017 to 2025, this engine guard addresses the vulnerability of the naked bike's exposed engine case. The title identifies it as a crash bar, which is essential for protecting the aluminum engine block from direct impact when the bike is leaned over aggressively or dropped in traffic.
Examine the photo for the welds where the bar meets the frame, as these are the stress points during a fall. Verify that the bar's diameter is consistent and that the finish appears thick enough to resist rust and abrasion from gravel, which is a common issue with thinner, cheaper guards.
$113.99
Price copied from the Amazon listing when this was written. Check the live price.
Field note 3
Motorcycle Engine Guard Bumper Crash Bars for VStrom 650 250 1050
This bumper fits the VStrom 650, 250, and 1050 models, providing a protective cage around the engine. The title lists it as an engine guard bumper, which is vital for adventure bikes that often encounter rough terrain or need to be dropped on their side when navigating tight spaces or stopping at lights.
Look at the photo to see how the bar wraps around the lower engine area, ensuring it does not interfere with the kickstand. Check the thickness of the steel tube, as a thinner bar will bend and fail to protect the engine block, while a thicker one will absorb the impact and keep the fairing intact.
$25.99
Price copied from the Amazon listing when this was written. Check the live price.
Field note 4
2014-2026 Flat Out Engine Guard Crash Bar compatible with Harley…
Compatible with 2014-2026 Harley Davidson Touring models, this Flat Out engine guard is designed to protect the engine and frame. The title specifies it as a crash bar, which is crucial for preventing damage to the fairing and engine block when the bike is dropped on its side at a red light or in a parking lot.
In the product image, focus on the lower section of the bar that sits closest to the ground. This is the part that takes the brunt of the impact, so look for a robust, thick steel construction that can withstand the weight of the bike without bending or breaking.
$125.13
Price copied from the Amazon listing when this was written. Check the live price.
Field note 5
Crash Bars for Triumph Bonneville Bobber Bonneville T100 T120…
This steel highway engine guard fits Triumph Bonneville, Bobber, T100, T120, Street Twin, Cup, and Thruxton 1200 R models. The title emphasizes it as a bumper, which is essential for protecting the engine block from direct impact when the bike is dropped on its side, especially on wet or gravel-covered roads.
Check the photo for the finish on the steel tube, as a poor coating can lead to rust and corrosion over time. Look at the mounting hardware to ensure it is included and appears sturdy, as weak mounts can fail under the stress of a fall, leaving the engine exposed.
$39.98
Price copied from the Amazon listing when this was written. Check the live price.
Field note 6
Motorcycle Lower Highway Crash Bars Engine Guard Stunt Cage Bumper…
This lower highway crash bar acts as a stunt cage and bumper for the side frame and fuel tank. The title highlights its role in falling protection, which is critical when you need to drop the bike on its side at a red light to prevent the fairing and engine block from taking a direct hit from the pavement.
In the photo, examine the lower section of the bar that extends past the engine. This is the part that will contact the ground first, so look for a thick, heavy-duty steel construction that can absorb the impact without bending or breaking, ensuring the bike remains upright and undamaged.
$166.99
Price copied from the Amazon listing when this was written. Check the live price.
Field note 7
Motorcycle Highway Crash Bar Engine Guard Fit for Rebel CMX 500…
Fit for the Rebel CMX 500 from 2017 to 2026, this highway crash bar provides bumper and frame protection. The title identifies it as an engine guard, which is essential for protecting the engine block from direct impact when the bike is dropped on its side at a red light or in a parking lot.
Look at the photo to see how the bar wraps around the lower engine area, ensuring it does not interfere with the footpegs or exhaust. Check the thickness of the steel tube, as a thinner bar will bend and fail to protect the engine block, while a thicker one will absorb the impact and keep the fairing intact.
$72.99
Price copied from the Amazon listing when this was written. Check the live price.
Field note 8
for CF-Moto 800MT MT800 MT 800 MT CF800MT 2021 2022 2023…
This engine guard bumper fits the CF-Moto 800MT, MT800, and CF800MT models from 2021 to 2023. The title describes it as a stunt cage and frame falling body protection, which is vital for adventure bikes that often encounter rough terrain or need to be dropped on their side when navigating tight spaces or stopping at lights.
Examine the photo for the welds where the bar meets the frame, as these are the stress points during a fall. Verify that the bar's diameter is consistent and that the finish appears thick enough to resist rust and abrasion from gravel, which is a common issue with thinner, cheaper guards.
$139.98
Price copied from the Amazon listing when this was written. Check the live price.
Field note 9
Motorcycle 1"-1.25" Crash Bar Protectors Fit for H-Arley Toring…
These crash bar protectors fit 1-inch to 1.25-inch bars for Harley Touring and Indian models. The title specifies them as protectors, which is essential for preventing damage to the fairing and engine block when the bike is dropped on its side at a red light, as they add a layer of protection to the existing guard.
In the product image, focus on the material of the protectors, as they should be made of a durable, non-slip material that can withstand the weight of the bike without tearing or breaking. Look at the fit to ensure they are snug and secure, as a loose protector can shift and fail to protect the engine block during a fall.
$16.89
Price copied from the Amazon listing when this was written. Check the live price.
Field note 10
Engine Guard Flat Out Crash Bar for 2014-2026 Harley Touring…
This Flat Out engine guard is compatible with 2014-2026 Harley Touring models, including the Street Glide, Road Glide, Road King, and Electra Glide. The title identifies it as a crash bar, which is crucial for protecting the engine and frame from direct impact when the bike is dropped on its side at a red light or in a parking lot.
Check the photo for the lower section of the bar that sits closest to the ground. This is the part that takes the brunt of the impact, so look for a robust, thick steel construction that can withstand the weight of the bike without bending or breaking, ensuring the bike remains upright and undamaged.
$145.96
Price copied from the Amazon listing when this was written. Check the live price.
What Marcus will let get rained on
I do not fake a trail test. If the title will not talk weather or weight, I bounce it.
- Weather or weight shows up in the title when the job needs it.
- Photo from that Amazon listing.
- No fashion-camping SKU with no spec.
- Public rating when shown.
Confirm IP/weight on Amazon. This page is not a field report.
Weather, weight, and packing
Is it waterproof?
Only if the listing says so. I did not dunk it.
What does it weigh?
Whatever the Amazon title prints.
Why few picks?
Your pack is not a catalog.