Measure this first

I test pressure canner rack dimensions so your pints do not rattle. Check the width and stack height on the Amazon page before you add to cart.

By Keiko Mori · Kitchen editor · Kitchen desk · Gadget Evaluator Lab

Keiko's heat check. Measure your pot's inner diameter and the rack's outer width to ensure a snug fit. Verify the rack's height allows for safe stacking without touching the lid.

When I test a pressure canner rack, I am looking for a stable base that keeps pint jars from shifting during the pressure cycle. A loose rack causes rattling, which can crack glass or break seals, so the fit is the only thing that matters here.

Look at the product photo to see the rack's diameter and the spacing between the support bars. You need to match these numbers to your specific canner model to ensure the jars sit securely without touching the sides.

1. 2Pack Stainless Steel Canner Rack, 12.6-Inch Pressure Canning Rack…

1. The listing specifies a 12.6-inch diameter, which is a critical measurement for ensuring the rack sits securely inside your pressure canner without touching the sides or bottom.
2. This size is typically designed for larger capacity canners, so you must verify your pot's internal diameter to avoid a loose fit that could cause jars to shift during the heating process.
3. In the product photo, look closely at the wire gauge and the spacing between the rungs.
4. If the wires appear thin or the gaps are too wide for your specific jar size, the rack may flex under the weight of multiple pints.
5. Check the visual thickness of the stainless steel to ensure it matches the durability required for repeated high-pressure cycles.

See Deal $16.59

2. HEEPDD Stainless Steel Canning Rack, 304 Foldable Anti Scalding…

1. This rack is labeled as 304 stainless steel and features a foldable design, which suggests it is intended for storage efficiency and compatibility with both water bath and pressure canning setups.
2. The title mentions it fits 8 pint Mason jars, so you need to measure your jar height and diameter to confirm they will sit flat and stable within the basket structure.
3. Examine the photo for the hinge mechanism and the handle attachment points.
4. If the foldable joints look weak or the handles are not contoured for a firm grip, lifting a full basket of hot water can be dangerous.
5. Ensure the visual representation shows a solid base that will not collapse when submerged in boiling water.

See Deal $34.93

3. ] 2 Packs Canner Rack For Presto Cookers, 11inch 28 cm Stainless…

1. The title explicitly lists compatibility with the Presto 01781 23-Quart canner and specifies an 11-inch (28 cm) diameter.
2. This is a precise fit check; if your canner is a different model or size, this rack may not center correctly or may interfere with the lid seal.
3. Measure your canner's internal width to confirm it matches this 28 cm specification.
4. Look at the photo to see if the rack has a flat bottom or if it relies on the canner's base for support.
5. If the image shows a simple wire loop without a solid platform, your jars may rock.
6. Verify that the visual design supports the weight of the jars without bending the wire structure.

See Deal $15.99

4. Stainless Steel Canning Rack, Foldable Steamer Rack with Contoured…

1. This listing highlights contoured handles and a foldable steamer rack design, which is useful for lifting jars out of hot water.
2. The title states it fits 8 Mason jars, so you must count your jar inventory and measure their dimensions to ensure they fit within the basket's footprint without overcrowding, which can prevent even heat distribution.
3. In the photo, check the handle length and the angle at which they attach to the basket.
4. If the handles are too short or positioned awkwardly, you may not be able to get a secure grip when the basket is full.
5. Ensure the visual shows a stable base that will not tip over when placed on the canner's rim.

See Deal $26.99

5. New 2-Pack Pressure Cooker Canning Rack for Presto 01781 23-Quart…

1. The title specifies a 2-pack of 11-inch (28 cm) racks compatible with Presto 01781 and All American 21.5-Quart canners.
2. This dual-pack setup is ideal for rotating racks to prevent wear, but you must verify that your canner's internal diameter matches the 28 cm size to ensure a snug fit that prevents jars from sliding.
3. Look at the photo to see if the racks have a solid base or if they are open-wire designs.
4. If the image shows a thin wire structure, it may not support the weight of multiple jars.
5. Check the visual for any signs of rust or weak welds that could fail under the stress of high-pressure canning.

See Deal $15.99

6. New 2-Pack Canning Rack for Pressure Cooker – Stainless Steel…

1. This listing offers a 2-pack of 11-inch (28 cm) stainless steel racks for Presto and All American canners.
2. The size is a key fit check; if your canner is smaller or larger, the rack may not sit flat, causing jars to tilt.
3. Measure your canner's internal width to confirm it aligns with this 28 cm specification.
4. In the product photo, examine the wire thickness and the spacing between the rungs.
5. If the wires look thin or the gaps are too wide, your jars may not sit securely.
6. Ensure the visual shows a sturdy construction that can handle the weight of multiple pints without bending or breaking.

See Deal $15.99

7. 2-Pack Canning Rack for Pressure Cooker – Stainless Steel – for…

1. The title indicates a 2-pack of 11-inch (28 cm) racks for Presto and All American canners.
2. This size is specific, so you must measure your canner's internal diameter to ensure the rack fits without being too loose or too tight.
3. A poor fit can lead to uneven heating and potential jar breakage.
4. Look at the photo to see if the rack has a flat bottom or if it relies on the canner's base for support.
5. If the image shows a simple wire loop without a solid platform, your jars may rock.
6. Verify that the visual design supports the weight of the jars without bending the wire structure.

See Deal $15.99

8. 2 Pcs 12" Stainless Steel Canning Rack Jar Lifter Rack

1. The listing specifies a 12-inch diameter, which is larger than the standard 11-inch racks.
2. This size is typically for larger canners, so you must measure your pot's internal width to ensure the rack fits securely.
3. If your canner is smaller, the rack will not sit flat and may cause jars to tip over.
4. In the photo, check the handle design and the wire gauge.
5. If the handles look flimsy or the wires are thin, lifting a full rack of hot jars can be dangerous.
6. Ensure the visual shows a sturdy construction that can handle the weight and heat of the canning process.

See Deal $22.99

9. 19 QT Electric Automatic Water Bath Canner – Non-Pressure…

1. This is a 19-quart electric automatic water bath canner with a temperature control range of 86–212°F.
2. The size is a critical fit check for your kitchen counter and your jar inventory.
3. Measure your available counter space and count your jars to ensure they fit within the 19-quart capacity without overcrowding, which can prevent even heating.
4. Look at the photo to see if the canner includes a lid and a rack.
5. If the image shows a bare pot without these accessories, you will need to purchase them separately.
6. Ensure the visual shows a sturdy base that will not tip over when filled with water and jars.

See Deal $149.99

10. Presto 01781 23-Quart Pressure Canner and Cooker and Presto 09995…

1. This bundle includes the Presto 01781 23-Quart pressure canner and a 7-function canning kit.
2. The 23-quart size is a significant volume, so you must measure your stovetop and counter space to ensure it fits.
3. Also, verify that your jars fit within the canner's internal diameter to avoid overcrowding.
4. In the photo, check if the canning kit includes a rack and a lid.
5. If the image shows only the canner without these accessories, you will need to purchase them separately.
6. Ensure the visual shows a sturdy construction that can handle the weight and heat of the canning process.

See Deal $207.32