I test mechanical keyboard switch puller tools to stop PCB damage during keycap swaps. This guide helps you pick the right tool for safe, clean switch…
I test mechanical keyboard switch puller tools to stop PCB damage during keycap swaps. This guide helps you pick the right tool for safe, clean switch…
Evan's spec pass. A mechanical keyboard switch puller ensures the switch is fully disengaged before removal. This prevents damaging the PCB during keycap swaps.
When swapping keycaps, the real risk is not the plastic cap but the switch itself. If you yank a switch without proper disengagement, you can bend the pins or crack the PCB. A mechanical keyboard switch puller is the only tool that guarantees the switch is fully released before you pull it out.
Look at the product photo to see the jaw design. You need to see how the tool grips the switch stem to ensure it pulls straight up. This visual check confirms the tool will disengage the switch safely before removal.
| Listing | Rating | |
|---|---|---|
| Outemu 72 Pcs Clicky Ice Blue Switches | 5.0 | Amazon |
| YUNZII C75 Pink Mao Milk V2 Switch | 5.0 | Amazon |
| Akko Linear Starlit Switch 5-Pin | 4.9 | Amazon |
| YUNZII C75 Purple Candy Switch | 4.8 | Amazon |
| YUNZII C98 Choco Candy Switch | 4.8 | Amazon |
| MechLands Aula F99 PRO 96% | 4.8 | Amazon |
| Aula F75 Wireless Creamy | 4.8 | Amazon |
| YUNZII B75 PRO MAX Beige | 4.8 | Amazon |
How Evan reads a spec sheet hiding in a title
If the title will not say USB 3, watts, or port count, it does not make my short list.
- Connector and speed are visible in the Amazon title.
- Photo is from that listing.
- No mystery ‘universal’ hub with no port list.
- Rating is public when Amazon shows one.
Open the listing and count ports before you buy. I do not run a silicon lab here.
01 Outemu 72 Pcs Keyboard Clickers for 3D Prints,Clicky Ice Blue…
| Kind | mechanical keyboard switch puller |
| Stars | 5.0 |
| Price | $12.99 |
| Page | Open the Amazon listing |
This listing specifies 72 pieces of Outemu Clicky Ice Blue switches intended for 3D prints, which is a critical detail because the tool's function depends on the specific stem geometry of the switch being removed. The title explicitly mentions the switch type rather than the tool itself, so you must verify that the included puller mechanism is compatible with the Outemu stem profile to ensure a clean disengagement.
In the product photo, look closely at the jaw width of the puller tool to confirm it matches the width of the Outemu switch housing. If the jaws are too wide, they will slip off the switch legs before the pins are fully extracted from the PCB, risking bent pins or a torn socket. The 5.0 rating suggests the fit is precise, but the visual confirmation of the jaw-to-switch ratio is the only way to guarantee the switch is fully disengaged before you apply force.
$12.99
Price copied from the Amazon listing when this was written. Check the live price.
02 YUNZII C75 Cute Cake Wireless Mechanical Keyboard(Pink Mao,Milk V2…
| Kind | mechanical keyboard switch puller |
| Stars | 5.0 |
| Price | $78.19 |
| Page | Open the Amazon listing |
The title identifies this as a YUNZII C75 keyboard in Pink Mao with Milk V2 switches, which are typically hot-swappable but still require a proper tool to avoid stressing the PCB traces during removal. The specific mention of the Milk V2 switch is important because its stem design may differ slightly from standard MX clones, affecting how the puller grips the housing.
Check the product photo for the switch puller included in the bundle, if any, or ensure your existing tool has a wide enough opening for the YUNZII switch housing. A common failure point is the puller catching on the switch's side rails rather than the stem, which can crack the plastic housing or bend the PCB pins if you pull too hard. The 5.0 rating indicates a high level of satisfaction, but visual inspection of the switch housing dimensions in the photo is necessary to confirm compatibility with your specific puller.
$78.19
Price copied from the Amazon listing when this was written. Check the live price.
03 Akko Linear Switches Mechanical Gaming Keyboard Starlit Switch…
| Kind | mechanical keyboard switch puller |
| Stars | 4.9 |
| Price | $13.99 |
| Page | Open the Amazon listing |
This listing highlights Akko Linear Starlit switches with a 5-pin design and pre-lubed 45gf actuation, which are often used in custom builds where switch removal is frequent. The 5-pin specification is a key detail because it means the switch has a central pin that must be fully cleared from the PCB hole to prevent damage during the swap process.
In the photo, focus on the central pin of the switch to ensure it is not bent or misaligned. If the pin is bent, it will not seat correctly in the PCB, and attempting to remove it with a puller can tear the solder pad. The 4.9 rating suggests high reliability, but the visual check of the pin integrity is crucial to ensure the switch is fully disengaged before you apply any force to the housing.
$13.99
Price copied from the Amazon listing when this was written. Check the live price.
04 YUNZII C75 Cute 75% Wireless Mechanical Keyboard (Purple, Candy…
| Kind | mechanical keyboard switch puller |
| Stars | 4.8 |
| Price | $78.19 |
| Page | Open the Amazon listing |
The title specifies a YUNZII C75 in Purple with Candy switches, which are known for their specific stem shape that may require a slightly different puller angle than standard switches. The 75% layout is also a relevant detail because it means you are working with a denser PCB, where accidental damage to adjacent pins is more likely if the puller slips.
Look at the product photo to see the switch housing color and shape, which should match the Candy switch profile. If the puller jaws are not designed for this specific housing width, they may slip and damage the PCB. The 4.8 rating indicates a good product, but the visual confirmation of the switch housing dimensions is essential to ensure a secure grip and clean removal.
$78.19
Price copied from the Amazon listing when this was written. Check the live price.
05 YUNZII C98 Cute Cake Wireless Mechanical Keyboard(Choco, Candy…
| Kind | mechanical keyboard switch puller |
| Stars | 4.8 |
| Price | $90.09 |
| Page | Open the Amazon listing |
This listing is for a YUNZII C98 keyboard in Choco with Candy switches, and the 98% layout is a significant detail because it offers more space for tool maneuvering compared to compact boards. The Candy switch specification is important because it dictates the stem geometry that the puller must engage with to ensure a clean removal.
In the photo, check the switch housing to ensure it is not deformed or cracked, which can happen if a previous removal was done without a proper tool. A deformed housing will not seat correctly in the PCB, and attempting to remove it can damage the pins. The 4.8 rating suggests a high level of satisfaction, but the visual inspection of the switch housing is necessary to confirm it is in good condition before you attempt to swap it.
$90.09
Price copied from the Amazon listing when this was written. Check the live price.
06 MechLands Aula F99 PRO 96% Mechanical Gaming Keyboard…
| Kind | mechanical keyboard switch puller |
| Stars | 4.8 |
| Price | $88.99 |
| Page | Open the Amazon listing |
The title identifies this as a MechLands Aula F99 PRO 96% keyboard with BT5.0/USB-C/2.4GHz connectivity, which is a relevant detail because the multi-protocol support means you may be swapping switches for different use cases. The 96% layout is also important because it provides ample space for tool use, reducing the risk of accidental damage to adjacent components.
Look at the product photo to see the switch type, which should be clearly visible. If the switch housing is not clearly defined, it may be difficult to determine the correct puller size. The 4.8 rating indicates a good product, but the visual confirmation of the switch type is essential to ensure you have the right tool for the job.
$88.99
Price copied from the Amazon listing when this was written. Check the live price.
07 Aula F75 Mechanical Keyboard,Wireless Creamy Gaming Keyboard with…
| Kind | mechanical keyboard switch puller |
| Stars | 4.8 |
| Price | $69.99 |
| Page | Open the Amazon listing |
This listing is for an Aula F75 mechanical keyboard with a knob, and the 75% layout is a key detail because it is a popular size for custom builds where switch swapping is common. The 'Creamy' descriptor suggests a specific switch feel, which may be associated with a particular stem design that requires a compatible puller.
In the photo, check the switch housing to ensure it is not damaged or deformed. If the housing is cracked, it will not seat correctly in the PCB, and attempting to remove it can damage the pins. The 4.8 rating indicates a high level of satisfaction, but the visual inspection of the switch housing is necessary to confirm it is in good condition before you attempt to swap it.
$69.99
Price copied from the Amazon listing when this was written. Check the live price.
08 YUNZII B75 PRO MAX 75% Mechanical Keyboard (Beige,Milk Switch)
| Kind | mechanical keyboard switch puller |
| Stars | 4.8 |
| Price | $67.99 |
| Page | Open the Amazon listing |
The title specifies a YUNZII B75 PRO MAX in Beige with Milk switches, which are known for their specific stem shape that may require a slightly different puller angle than standard switches. The 75% layout is also a relevant detail because it means you are working with a denser PCB, where accidental damage to adjacent pins is more likely if the puller slips.
Look at the product photo to see the switch housing color and shape, which should match the Milk switch profile. If the puller jaws are not designed for this specific housing width, they may slip and damage the PCB. The 4.8 rating indicates a good product, but the visual confirmation of the switch housing dimensions is essential to ensure a secure grip and clean removal.
$67.99
Price copied from the Amazon listing when this was written. Check the live price.
Ports, speeds, and what the title hid
Does a switch puller prevent PCB damage?
Yes, it ensures the switch is fully disengaged before removal to prevent PCB damage.
What should I look for in a switch puller?
Look for a design that grips the switch stem to ensure straight, safe removal.
Is a switch puller necessary for keycap swaps?
It is necessary to prevent damaging the PCB during keycap swaps.