The title specifies a slim, thin profile designed for sliding glass doors, which is the critical dimension when you are trying to avoid drilling into the frame or compromising the door seal. This form factor is essential for installations where the door mechanism must remain intact and the glass is not a suitable surface for standard deadbolt hardware.

In the product photo, verify that the lock body is thin enough to sit flush against the glass surface without creating a gap that would interfere with the sliding track or the door's closing mechanism. Look for the mounting bracket design to ensure it clamps securely without requiring holes in the glass or the metal frame, which is the primary failure point for non-drill installations.

This listing identifies the TEEHO TE011W model in a satin nickel finish, a standard deadbolt configuration that typically requires a pre-drilled hole in a solid door frame rather than a glass surface. The model number is the key string to match against your existing door hardware to ensure the backset and faceplate dimensions align with your current setup.

Check the product image for the faceplate width and the depth of the latch mechanism, as these determine whether the lock can be installed without altering the door's structural integrity. If your door is glass, this standard deadbolt design will not meet the no-drill requirement, so the photo should be used to confirm the mounting hardware is compatible with a solid frame where drilling is already present or planned.

The title highlights a 5-in-1 keyless entry system with video capabilities, which adds bulk to the lock body compared to standard deadbolts. This increased size is a significant factor when considering installation on a glass door, as the housing must be thin enough to avoid interfering with the door's seal and sliding mechanism.

In the photo, examine the thickness of the video camera module and the keypad assembly to ensure they do not protrude excessively from the door surface. A bulky housing can prevent the door from closing properly or damage the weather seal, so the visual profile must confirm a slim design suitable for glass applications where drilling is not an option.

This product is explicitly titled for frameless glass doors, featuring keyless entry deadbolts with Bluetooth, fingerprint, and IC card access. The 'frameless' designation is the critical detail, indicating a design that does not rely on a traditional door frame for mounting, which is essential for avoiding damage to the glass or the seal.

Look at the product photo to see how the lock attaches to the glass, typically via a clamping mechanism or a specialized bracket that does not require drilling. The image should clearly show the mounting hardware engaging the glass edge or surface without penetrating it, ensuring the door mechanism remains intact and the seal is not compromised by the installation process.

The eufy Familock E32 is listed as a fingerprint keyless entry door lock, a model known for its standard deadbolt form factor. The 'E32' model number is the specific identifier you need to check against your door's existing bore hole and backset dimensions to ensure compatibility without requiring new drilling.

In the product image, focus on the latch bolt length and the faceplate design to determine if the lock can be installed on a door that already has a standard deadbolt hole. If your door is glass, this standard design will not fit the no-drill requirement, so the photo serves to confirm the hardware is for solid doors where the mechanism is already in place.

The Philips Upgraded Wi-Fi Smart Lock is described with a handle and keyless entry, a configuration that typically involves a lever or knob mechanism rather than a simple deadbolt. The 'with handle' detail is crucial because it affects the mounting footprint and the amount of space required on the door surface, which is a constraint for glass doors.

Check the photo for the handle's projection and the mounting plate size to ensure it does not interfere with the door's closing action or the seal. A handle-based lock on a glass door requires a specific mounting solution that does not involve drilling, so the image must show a design that can be clamped or attached without penetrating the glass or frame.

This listing is a built-in WiFi deadbolt with fingerprint and keypad access, designed for front doors with standard deadbolt holes. The 'built-in WiFi' feature means the lock body is self-contained, which can add to the overall depth of the unit compared to models that require a separate hub.

In the product photo, verify the depth of the lock body and the keypad assembly to ensure it fits within the door's thickness without protruding excessively. For glass doors, this standard deadbolt design is not suitable for no-drill installation, so the image is used to confirm the hardware is for solid doors where the bore hole is already present and the seal is not a concern.

The LOCKSTAR Smart Door Lock is a keyless entry deadbolt with multiple entry methods, including app, fingerprint, and keypad. The 'deadbolt' classification indicates a standard form factor that requires a pre-drilled hole in a solid door, which is incompatible with the no-drill requirement for glass doors.

Look at the product image to see the faceplate and latch mechanism, which are designed for solid wood or metal doors. The photo should be used to confirm that the mounting hardware is for a standard door frame, as this lock cannot be installed on glass without drilling, which would violate the page job's constraint of avoiding damage to the seal and glass.

The myQ Secure View 3-in-1 Smart Lock includes a 2K HDR doorbell camera, face, fingerprint, and PIN access. The '3-in-1' designation and the inclusion of a camera module make this a bulky unit that is not designed for glass door installation without significant modification.

In the product photo, examine the size of the camera housing and the keypad to understand the physical footprint of the lock. This unit is too large and complex for a no-drill glass door installation, so the image serves to confirm that it is intended for solid doors where the weight and size can be supported by the frame without compromising the seal or mechanism.