I test infrared grill burner swaps to stop raw middles. This guide helps you fix hot spots on your current gas grill without buying a new unit.

By Avery Quinn · Beauty, kids, and pets editor · Kids, pets, and skin · Gadget Evaluator Lab

Avery's caution. Swap your standard tube for an infrared ceramic element to cut direct flame contact. This spreads heat evenly across the steak surface instead of scorching the edges.

I am Avery Quinn, and I look at how heat moves through a grill. If your steaks have blackened edges and pink centers, your current burner is creating localized hot spots that a standard tube cannot manage.

Check the product photo to see the ceramic or stone element shape. You need to verify the physical dimensions match your existing burner slot before you order, as the listing title does not list specific grill brand compatibility.

Check age, size, and small parts on the listing before this goes in a bag.

BBQ Grill Searing Burner Ceramic Infrared Sear Burner Replacement…

This replacement part is specifically labeled for the Grand Hall Turbo Infrared main burner, targeting the ceramic infrared technology that often causes uneven heat distribution in high-end setups. If your steak is charring on the surface while the center remains pink, this component is designed to replace the existing main heat source rather than adding a new zone.

In the product photo, verify that the ceramic emitter surface is intact and free of cracks, as a fractured infrared panel is a common failure point that leads to the exact hot-spot issue you are trying to fix. Ensure the mounting brackets align with your current grill frame before swapping, since this is a direct replacement for the main burner assembly.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

Napoleon Stainless Steel Outdoor BBQ Barbecue Broil Infrared Side…

This stainless steel grid is built for the Napoleon LEX 485 and Prestige series, serving as a dedicated broil or side burner area that operates independently from the main cooking surface. It is a precision fit for models where the side burner is the primary source of intense, localized heat that can overwhelm a thick cut of meat.

Look closely at the photo to confirm the grid spacing and the specific stainless steel finish, as these details determine how well it fits into the existing side burner housing. A warped or misaligned grid in the image suggests it may not seat correctly, which would leave gaps that cause the uneven searing you are experiencing.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

EUHOME 4-Burner Propane Gas BBQ Grill with Side Burner, 46,500 BTU…

This is a complete 4-burner propane unit with 46,500 BTU output and enameled cast iron grates, positioned as a full appliance rather than a single component. It includes a side burner and stainless steel construction, offering a different heat management approach than a simple infrared replacement part.

The photo shows the full profile of the grill, including the side table and control panel layout. Since this is a new unit, you are evaluating the overall design for heat distribution rather than fixing a specific faulty part, so check the visible grate material to ensure it matches the even-heating profile you need for steaks.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

Napoleon Stainless Steel Outdoor BBQ Barbecue Broil Infrared Side…

Designed for the Napoleon LEX 485 and Prestige grills, this stainless steel infrared side burner is a direct replacement for the high-heat zone that often creates the outside-burnt, inside-raw problem. It is a specific component for models where the side burner is the primary source of intense, localized heat.

In the listing image, inspect the stainless steel housing for any signs of warping or damage, as a deformed burner body will not seal properly against the grill frame. This seal is critical for preventing heat loss and ensuring the infrared element heats evenly across the steak surface.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

𝙐𝙥𝙜𝙧𝙖𝙙𝙚𝙙 4PC Heavy Duty Cast Stainless Steel BBQ Grill Burners 16…

This 4-pack of heavy-duty cast stainless steel burners is sized at 16 1/8 inches, a specific dimension that must match your existing grill’s burner slots to ensure proper gas flow and heat spread. It is a standard replacement part for premium gas grills from brands like Bull, Cal Flame, and Aussie.

The photo displays the burners in a set, so check the length and the porting pattern to confirm they fit your specific model. A mismatch in length or port alignment will result in uneven flame distribution, which is the root cause of the hot spots you are trying to eliminate.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

Heavy Duty Cast Stainless Steel 304 Bull Grill Burner Replacement…

This heavy-duty cast stainless steel 304 burner is a replacement part for outdoor premium gas BBQ grills, specifically listing compatibility with Bull, Lion, Cal Flame, and Blaze models. It is a standard component designed to restore even heat output in grills that have developed uneven flame patterns.

Look at the photo to verify the material grade and the specific shape of the burner tube. Since this is a single replacement part, ensure the diameter and length match your existing setup to avoid gaps that cause uneven searing on thick steaks.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

BBQ Grill Searing Burner Ceramic Infrared Side Sear Zone Burner…

This ceramic infrared side sear zone burner is a replacement part compatible with the KitchenAid Nex 720-0720 and NXG20001486A0 models. It is designed to replace the specific high-heat side burner that often causes uneven cooking on these particular grills.

In the product image, check the ceramic emitter for any visible cracks or chips, as even minor damage can lead to the intense, localized heat that burns the outside of a steak while leaving the center raw. Ensure the mounting hardware shown matches the slots in your existing grill frame.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

3 Pack Grill Burner Replacement Parts for Coyote, RCS Cutlass Grill

This 3-pack of grill burner replacement parts is specifically for the Coyote and RCS Cutlass grill models, providing a complete set to replace the main heat sources. It is a direct fit for these specific brands, ensuring the gas flow and heat distribution are restored to factory specifications.

The photo shows the three burners together, so verify the length and the porting pattern to ensure they match your existing setup. A mismatch in these dimensions will result in uneven flame distribution, which is the primary cause of the hot spots you are trying to fix.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

S13365 Grill Burner Replacement Parts Compatible with Delta Heat…

This 3-pack of grill burner replacement parts is compatible with Delta Heat 32 and 38-inch BBQ grills, offering a complete set to replace the main heat sources. It is a direct fit for these specific models, ensuring the gas flow and heat distribution are restored to factory specifications.

In the listing image, inspect the burners for any signs of warping or damage, as a deformed burner body will not seal properly against the grill frame. This seal is critical for preventing heat loss and ensuring the flame heats evenly across the steak surface.

See it on Amazon

Check age, size, and small parts on the listing before this goes in a bag.

BESTFIRE 3-Burner Tabletop Gas Grill with Viewing Glass, 30,000…

This is a 3-burner tabletop gas grill with 30,000 BTU output and a viewing glass, positioned as a portable propane unit rather than a replacement part. It includes a thermometer and stainless steel construction, offering a different heat management approach than a simple infrared replacement component.

The photo shows the full profile of the grill, including the side table and control panel layout. Since this is a new unit, you are evaluating the overall design for heat distribution rather than fixing a specific faulty part, so check the visible grate material to ensure it matches the even-heating profile you need for steaks.

See it on Amazon