Measure this first

I test baking pizza steel for fit. If your oven rack is narrow or the steel is too wide, this page tells you what to measure before you order.

By Keiko Mori · Kitchen editor · Kitchen desk · Gadget Evaluator Lab

Keiko's heat check. Measure your oven interior width and rack depth. Match the steel diameter to those numbers on the Amazon listing.

A baking pizza steel only works if it sits flat on your rack. If the steel is wider than your oven cavity or deeper than your rack spacing, it will not bake evenly or fit at all.

Check the diameter and thickness listed on the Amazon page. Match those numbers to your oven width and rack depth to ensure the steel fits without touching the walls.

1. 14 x 14 inch Pizza Steel, Premium Carbon Steel Baking Plate for…

1. The title specifies a 14 x 14 inch square format made of premium carbon steel, which dictates that you must measure your oven rack width to ensure the dual handles do not interfere with the heating elements or door clearance.
2. Skip this if your oven cavity is narrower than 14 inches or if you require a round shape for specific dough stretching techniques, as the square geometry limits the maximum diameter of the pizza you can bake.

See Deal $63.99

2. NerdChef Steel Stone – High Performance Pizza Baking

1. This listing highlights a 14.5" x 16" dimension with a .375" thickness, so you need to verify your oven’s vertical clearance and rack spacing to accommodate the extra height compared to standard thinner steels.
2. Avoid this model if you are using a compact countertop oven or a grill with a tight lid clearance, because the 0.375-inch profile may prevent the lid from closing fully or the rack from sliding in smoothly.

See Deal $129.95

3. Pizza Steel XL 16"x13.4"

1. The title lists a 16"x13.4" footprint, meaning you must check the internal width of your oven or grill to confirm the steel fits without bending the rack wires or touching the side walls.
2. Do not buy this if your cooking surface is smaller than 16 inches wide, as the excess overhang will make it unstable and difficult to remove safely from a high-heat environment.

See Deal $49.99

4. Round Pizza Steel 12" – Reversible 3D Cast Creates Gorgeous…

1. This is a 12-inch round steel with a reversible 3D cast surface, so you should measure the diameter of your oven rack to ensure the circular shape sits flat and does not roll or tip on uneven surfaces.
2. Skip this if you need to bake larger family-sized pizzas, as the 12-inch limit restricts the crust size, and if you prefer a flat, uniform surface, the 3D cast texture may alter the crust contact area.

See Deal $42.00

5. 13.5" Baking Steel Pizza Steel for Oven & Grill, Faster Heating…

1. The title specifies a 13.5-inch size, which requires you to measure your oven’s internal width to ensure the steel fits comfortably between the heating elements without requiring you to remove the rack.
2. Avoid this if your oven is significantly larger than 13.5 inches, as the smaller surface area may not provide enough thermal mass for rapid heat transfer, or if you need a rectangular shape to fit a specific pan or tray.

See Deal $48.99

6. Primica Pizza Steel XL for Oven & Grill,16"x13.4", The Ultimate…

1. This listing describes a 16"x13.4" XL size, so you must verify that your oven or grill can accommodate a steel of this width, particularly if you are using a standard residential oven with limited rack adjustability.
2. Skip this if you have a small oven or if you prefer a thinner profile for easier handling, as the 'XL' designation implies a heavier and wider footprint that may be cumbersome to maneuver in tight spaces.

See Deal $59.97

7. Chef Pomodoro 16 Inch Pizza Steel for Oven, Seasoned Baking Steel…

1. The title indicates a 16-inch seasoned steel, meaning you need to check the diameter of your oven’s interior to ensure the 16-inch circle fits without touching the sides, which could cause uneven heating or damage.
2. Do not choose this if your oven is smaller than 16 inches in diameter, or if you are using a grill with a narrow grate, as the large circular shape may not sit securely on standard rectangular rack configurations.

See Deal $59.99

8. The Original Baking Steel®

1. This is a 14"x16"x¼" pre-seasoned steel, so you must measure your oven’s width and depth to confirm the 16-inch length fits, and check the rack spacing to accommodate the ¼-inch thickness without interfering with the heating elements.
2. Skip this if you need a round shape for specific pizza styles, or if your oven is narrower than 14 inches, as the rectangular format and specific dimensions may not align with your existing cookware or oven constraints.

See Deal $139.00